Descargar Imprimir esta página

VITO HAND TOOLS VIFC-D5020 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
5) Ensure the gas cartridge to be
replaced is completely empty before
inserting a new one. Never change a
cartridge unless the appliance is shut off.
6) Check the seals before
connecting a new cartridge to the
appliance.
7) Screw off the bottom of the
cartridge holder and take out the
empty cartridge.
8) Insert the gas cartridge and
screw on the bottom of the
cartridge holder.
B.LIGHTING OF THE STOVE
1) Ensure that there is no gas
leakage.
2) Light a match and put it near the
burner, open slowly the gas tap until
the gas ignites.
3) To regulate the intensity of the
flame, slightly open or close the
knob of the gas tap.
4) The phenomenon of flaring which
may be occurred during warming up
period or if the appliance is moved.
C. SHUTDOWN OF THE
COOKER
To shutdown the stove, the control
knob of the gas tap must be fully
closed. After using this appliance,
wait until the cooker cools down
completely.
D. ADJUST THE RATE
Open
CAUTION: accessible parts may
become very hot.
Keep young children away from the
appliance.
E. SERVICE
In case assistance or maintenance
is needed please contact your
dealer.
DECLARATION
OF CONFORMITY
We declare under our exclusive
responsibility, that the product
Meets the following standards
or standardization documents:
EN 521:2019, EN 1326:1996.
WARRANTY
TERMS
The warranty for this product is in
accordance with the law in force
from the date of purchase.
You should, therefore, keep your
proof of purchase during this period.
The warranty covers any
manufacturing defect in material or
operation, as well as parts and work
needed for their repairing.
Excluded from the warranty are
the misuse of the product, any
repairs carried out by unauthorized
individuals (outside the service
center of the brand VITO) as well as
any damage caused by its use.
Closed
7

Publicidad

loading