Home2O H11L-421-CH Manual De Instalación

4-INCH CENTERSET BATHROOM FAUCET
H11L-421-CH – Polished chrome finish
H11L-421-BN – Brushed nickel finish
H11L-421-MB – Matte black finish
PACKAGE AND HARDWARE CONTENTS
PART DESCRIPTION
A Faucet body
B Push pop-up drain
C Mounting nut
Due to constant design and quality improvements, the product may look slightly
different from the picture.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to
assemble, operate or install the product.
WARNING
• Protect your eyes with safety glasses when cutting or soldering
water supply lines.
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list. If any part is missing or
damaged, do not attempt to assemble the product. Contact customer
service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Adjustable wrench, slip joint
pliers, pipe wrench, Phillips screwdriver, silicone, and supply lines.
Need Help? Please call our toll-free line at (877) 319-3757, 7:30 a.m. to 4:30 p.m. CST, for additional assistance or service.
Homewerks Worldwide, LLC • Lake Bluff, IL 60044 • Homewerks.com
QUANTITY
1
1
2
CAUTION
• If you solder the joints during installation, the seats, cartridges, and
washers must be removed before using a flame or the warranty will
be voided on these parts.
• Cover the sink drain to avoid losing parts.
Installation may vary depending on how the previous faucet was installed.
Supplies necessary for the installation of the faucet are not all included;
however, they are available wherever plumbing supplies are sold.
Prior to beginning installation, turn off the hot and cold water lines, then
turn on the old faucet to release built-up pressure. When installing the
new faucet, hand tighten the connector nuts. DO NOT OVERTIGHTEN.
Connections that are too tight will reduce the integrity of the system.
A
C
ADA
COMPLIAN T
B
01/2021