Kärcher WD 4 Manual Del Usuario página 9

2.
1.
Starting up the device
1. Plug the electrical cord into the outlet.
2. Move the device switch to the re-
quired position.
 Position "1 ON": The device is
switched on.
 Position "0 OFF": The device is
switched off.
ATTENTION
Missing flat pleated filter
Device damage
Always work with the flat pleated filter
inserted.
Note
When purchasing and installing filter
bags and flat pleated filters, pay atten-
tion to the current part numbers.
Information on accessories and spare
parts can be found at www.kaerch-
er.com.
Dry vacuuming
ATTENTION
Sucking cold ashes
Device damage
Only vacuum cold ash with an ash pre-
separator.
ATTENTION
Defective or wet flat pleated filter
Device damage
Before using, check the flat pleated fil-
ter for damage and replace it if neces-
sary.
Only vacuum with a dry flat pleated fil-
ter.
Note
Regularly replace the filter bag when
full as a filter bag that is too full could
be damaged. The filling level of the fil-
ter bag depends on the dirt being vac-
uumed. The filter bag should be
replaced more often in the case of fine
dust, sand, etc.
Wet vacuuming
ATTENTION
Wet vacuuming with a filter bag
Device damage
Do not use a filter bag when vacuum-
ing wet debris.
English
Operation
9