Descargar Imprimir esta página

PEDROLLO TISSEL-200 Instrucciones Originales De Uso página 41

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48
INSPECTION LIST (INSP)
The INSP (Inspection) list allows one to visualise the history of functioning of the inverter, in particular the hours of functioning,
the number of start times, the registration of the alarms.
WH
INSP
TH
NS
SH
E1
EH
EE
TEST
To switch on and regulate the pump manually:
• Enter into TEST mode through access to the HIDDEN LISTS.
• Proceed as shown below to start up and adjust the speed of the pump.
• During the TEST it is possible to display all the operating parameters (through the display of the operating parameters).
INSTRUCTION
INSTRUCTION
TEST mode (the word TEST appears on the display)
TEST mode (the word TEST appears on the display)
Switch on the pump by pressing the OFF/ON switch;
Switch on the pump by pressing the OFF/ON switch;
the pump starts up at the minimum frequency
the pump starts up at the minimum frequency
Display the operating frequency by scrolling with the arrow
Display the operating frequency by scrolling with the arrow
Vary the operating frequency by 1 Hz at a time with the arrows
Vary the operating frequency by 1 Hz at a time with the arrows
Display the operating parameters with the arrows
Display the operating parameters with the arrows
At the end of the TEST switch off the pump by pressing the OFF/ON switch
At the end of the TEST switch off the pump by pressing the OFF/ON switch
HOURS OF FUNCTIONING
OF THE PUMP
HOURS INVERTER
SWITCHED ON
TOTAL NUMBER OF
STARTS
AVERAGE NUMBER OF
STARTS
LAST ERROR
HOUR OF LAST ERROR
ZEROING ERRORS
Hours of functioning of the pump (motor switched on.
Hours of functioning (device switched on, with pump
functioning or in STAND-BY).
Number of starts of the pump, from the time of
installation.
Average number of starts each hour the inverter is
switched on.
Last error registered.
Hour last error registered (referred to TH).
Allows one to reset the errors register; to reset the
register press the SET button and keep it pressed until
"OK" appears on the display.
(SET
****
OK)
DISPLAY
DISPLAY
TEST
P 2.0
F 30
F 35
A 3.5
OFF
ENGLISH |
41

Publicidad

loading

Productos relacionados para PEDROLLO TISSEL-200