Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE ALARMS
1.
Press AL 1.2 once, the A1 LED and the hour digits flash. Press
hour. (hold to advance rapidly).
2.
P ress AL 1.2 again to adjust minutes. Press
advance rapidly).
3.
Press AL 1.2 again, LED displays "OFF" (alarm off). To select wake to sound sources, press
or
to select :-
rd = wake-by-radio
bu = wake-by-buzzer
OFF = alarm off
4.
P ress AL 1.2 again, the A2 LED and the hour digits flash. Press
hour. Repeat step 2) and 3) to set alarm 2.
Press AL1.2 again or no button is pressed in around 10 seconds to exit alarm setting mode.
5.
When wake-by-radio or wake-by-buzzer is selected, the related alarm is turned on, indicated
by appearance of the A1 and / or the A2 LED on the left side of the display.
Note: Alarm function can only be operated at AC mode only.
STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When alarm 1 or 2 is sounding, the related A1 or A2 LED flashes. Press the RADIO/ SLEEP or AL
1.2 once to stop the alarm and reset it to come on the following day. After that, A1 or A2 icon stays
on the display.
SNOOZE OPERATION (default snooze duration is 5 minutes)
When alarm is sounding, press
the set snooze duration.
Note: If your second alarm activates while the first alarm is sounding or it is in the snooze mode, the
second alarm overrides the first alarm (the first alarm is reset to come on the next day).
USING THE HI-LO DIMMER
Press
to adjust the brightness (HI/ LO/OFF) of the LED display. This can only be done
when the radio is off or the unit is not sounding.
SETTING UP THE FM ANTENNA
Extend the FM wire antenna fully and vary the direction for the best FM reception. Do not strip, alter
or attach to other antennas.
or
to set the alarm 1 minutes. (hold to
5
once, the alarm will be silenced and come on again after
or
to set the alarm 1
or
to set the alarm 2
EN 3
Publicidad
