Publicidad
Idiomas disponibles
Idiomas disponibles
numbers on the left are flashing (hour) and the hour can be set by pressing
the "UP" button. Press the "SET" button and the numbers on the right
(minutes) are flashing, the minutes can be set by pressing the "UP" button.
Press the "SET" button to return to the hour setting or press the "CLOCK"
button to end the setting mode and return to clock display.
Change between view of clock time and counted time
Press the "CLOCK" button once to change between the views of clock time
and counted time. For example, if you press "CLOCK" button when LCD
displays clock time, it will change to counted time. The first row displays
hour and minute part, the second row displays day part (range:0.000-9999
days).
The
icon will disappear while the LCD displays counted time.
The
icon will appear again when changing back to clock display.
Counted time display
When COST MANAGER detected power overload of 2w, it starts counted
time and the LCD displays 0:00. Within the first 60 minutes (0:00 to 0:59),
the first number shows the minutes and the following number shows the
seconds. After the first 60 minutes (1:00 to 23:59) the time is displaying
hours as first number and minute as second number. When the time is
above 24 hours, the counted time will reset to 0:00.
Cost display
The second row shows the electric charge and similar values, press the
"COST" button to go through the different viewing options:
Counted electric charge (range: 0.000 ～ 9999COST ) →
Counted electric power (range: 0.000 ～9999KWH ) →
(range: 0.000 ～ 9999kg CO
Volume Kg of CO
, 1kwh change into 0.998kg
2
2
) →
CO
2
Rate of electric charge (range: 0.000～9999 COST/KWh, the default value
of system is 1.00 COST/KWh )
Note:
When electric charge and price are displayed on LCD, the corresponding
currency symbol is always visible. The initial currency in factory settting is
set to
.
Cost setting
Press and hold the "COST" button for 3 seconds to enter the cost setting
EN3
Publicidad
