Techno Line COST MANAGER Manual De Instrucciones página 13

mode, then set as follows:

This COST MANAGER has four kinds of currency symbol, such as
( money symbol); ￡(Pound);＄(US Dollar);€ (Euro). Press the
"UP" button to choose the symbol that you want, then press the "OK"
button select and continue.

When finished the currency setting, press the "UP" button to choose
the tariff. Simple tariff is "TARIFF 1",dual tariff is "DUAL TARIFF".
Press the "UP" button to switch between option and press the "OK"
button to select and continue.

If you choose "DUAL TARIFF", press the "SET" button to choose the
blinking value (the second row of LCD), then press the "UP" button to
set the rate (range:0.000～9999COST/KWH). Press the "OK" button to
select and continue.

Then "time start" displayed on LCD, please press the "SET" button to
choose the twinkling number( first row on LCD), then press the "UP"
button to set (range of first two numbers:0-23; range of last two
numbers:0-59). Press the "OK" button to select and continue. Press
"COST" button to save and exit the setting mode and return to initial
LCD displayed mode.
Notes:

If choose simple tariff "TARIFF 1",you just need to set the rate of
"TARIFF 1", then press the "COST" button to save and exit the setting
mode and return to initial LCD displayed mode.

While setting the price parameter, the corresponding currency symbol
will be displayed.

If the system is in "DUAL TARIFF" mode, finished tariff 2 means the
start of tariff 1; finished tariff 1 means the start of tariff 2.
Electricity parameter display and setting

The third row shows power, voltage and similar values, press the "
ENERGY" button to go through the different viewing options:
Present power (range:0.000 ～ 9999 W ) →
Present voltage (range:0.000 ～ 9999 V ) →
Present frequency (range: 0.000 ～ 9999 Hz ) →
Present current (range:0.000～9999 A ) →
Present power factor (0.000～1.000 Power factor ) →
MAX overload watts (range:0.000-9999 W ) →
MIN overload watts (range: 0.0W-9999 W ) →
EN4