Techno Line WS 9172 Manual De Instrucciones página 9

for best possible measuring.

For exchanging batteries, open the battery compartment covers and
take out the old batteries. Wait 2 minutes to fully reset the station and
sensor and follow the above steps with the new batteries.
Manual time setting

In normal display mode, press and hold the "°C/°F / SET" button for 2
seconds to enter the setting mode and the 12/24 hour time display is
flashing.

Press the "MAX/MIN / +" button to set 12 hour or 24 hour time display.
In 12 hour time display, the time will be shown with either the PM (after
noon) or AM (before noon) icon, to indicate the correct time. Press the
"°C/°F / SET" button to save your changes and continue with the next
setting option.

The hour display is flashing, press the "MAX/MIN / +" button to set the
hour. Press the "°C/°F / SET" button to save your changes and continue
with the next setting option.

The minute display is flashing, press the "MAX/MIN / +" button to set
the minute. Press the "°C/°F / SET" button to save your changes, exit
the setting and return to normal display mode.
Notes

Press and hold the "MAX/MIN / +" button in the setting mode to quickly
adjust the setting values.

Do not press any button for 30 seconds to automatically exit the setting
process and return to normal display mode.
Temperature unit
In normal display mode, press the "°C/°F / SET" button to switch between
temperature display in °C or in °F.
MIN/MAX value display and reset

In normal display mode, press the "MAX/MIN / +" button to switch
between maximum value display (MAX icon displayed), minimum value
display (MIN icon displayed) or current value display (no MIN/MAX icon
displayed)

Press and hold the "MAX/MIN / +" button for 2 seconds while viewing
the maximum or minimum values to reset the maximum or minimum
data history.

The MÌN/MAX values will automatically be reset every day at 0:00.
EN3