Techno Line WT 534 Manual De Instrucciones página 15


180 degree rotation of projection direction

Indoor temperature

Temperature alternatively in °C or °F

Table standing
Initial operation

Connect the included power cable with the socket on the backside of
the clock and then connect the cable to a fitting power source.

All icons on the LCD screen will light up for 3 seconds and you will hear
a signal tone. The clock will detect the indoor temperature and then
start to search for the DCF77- time signal.

Remove the plastic strip from the battery compartment to put the
battery into operation. The battery is used as back-up.
Note:
Please use the original power adapter included with this product or a power
adapter with the same specifications.
Battery changing
Open the battery compartment cover and insert 1 x CR2032 batteries by
observing the correct polarity ( "+" and " –" marks) into the battery
compartment. Close the batterie compartment cover again.
Reception of the radio signal

Press and hold the "
signal search manually. The "
the DCF77 signal search is active. The dynamic display indicates that
the signal is normal.
Receiving and signal detected
：Received successfully
" button for 2 seconds to start the DCF77 time
" icon is flashing, which indicates that
EN3
：