1. POWER: Press to turn on or turn off the main unit.
2. MIC1/MIC2 JACK: Plug the microphone into the jacks
3. USB JACK: Plug a USB stick into the jack .
4. MIC1/MIC2 VOL: Adjust the volume of MIC1/MIC2.
5. M.ECHO: Adjust to increase or decrease the echo depth of the microphones.
6. BASS CONTROL: Adjust to strengthen or weaken bass response.
7. LED Screen: Display the MP3 music play time.
8. TREBLE CONTROL Adjust to strengthen or weaken treble response.
9. BLUETOOTH LIGHT: The Bluetooth indicator will be illuminated when there is a Bluetooth device connected
to the amplifier. It will be off if there is no Bluetooth connection.
10. BALANCE CONTROL: Use the balance control knob to adjust the relative volume levels of the right and the
left speaker systems.
11. USB PLAY BUTTONS: PLAY/PAUSE/PREV/NEXT
12. MASTER VOLUME: Adjust the volume of the speaker system
13. INPUT SIGNAL SELECTOR: Choose input signal: AUX, MP3/ Bluetooth
14. INPUT SIGNAL SELECTOR: Choose input signal: MP3, Bluetooth
15. Normal: Press this button to adjust the tone of microphone to be normal
16. Robot: Press this button to adjust the tone of microphone to be robot
17. High: Press this button to adjust the tone of microphone to be higher frequency.
REAR PANEL:
1
1. AUX Audio Input: Connect the AUX signal here.
2. Main Speaker Output: Connect the main speakers here.
3. Power supply: Use the power cord provided with the amplifier to power on the amplifier.
USING THE AMPLIFIER
Select a sound source
•
Turn the VOLUME button to the lowest first. Switch the unit on. Use input signal button to select the sound
source.
•
Turn the VOLUME butt on to adjust Left and Right channel to a suitable level.
•
Use the USD play buttons to adjust the MP3 music playback.
•
Use the TREBLE button to adjust the treble to a suitable level.
•
Use the BASS button to adjust the bass to a suitable level.
•
Use the BALANCE button to adjust the volume level of R/L CH.
Bluetooth connection:
To play Bluetooth signal, enable the Bluetooth function on a Bluetooth device like cell phone and set the amplifi-
er to Bluetooth input mode and then search for available Bluetooth devices nearby on cell phone. The Bluetooth
name of the amplifier is "KARAOKE-STAR4-MKII". Pair and connect. There is no pairing code.
Note: The amplifier is only discoverable when input is set to Bluetooth.
KARAOKE-STAR4-MKII (10-7026)
2
www.ltc-audio.com
Model: KARAOKE-STAR4-MKII
Power supply/Alim.: 220-240V~ 50/60Hz
Cons: 100W
BT freq. BT : 2402-2480 MHz
Max. RF power/puiss. max BT :12.54dBm
Made in China for LOTRONIC S.A.
Av. Z. Gramme 9 • B-1480 Saintes
3
3