Publicidad
Idiomas disponibles
Idiomas disponibles
Automatic signal reception
The automatic signal reception starts by inserting the battery. After 2 to 5
minutes the hands will be adjusted to the correct radio controlled time
according to the DCF-77 reception signal. Then, the time will calibrate several
times a day with the DCF-77 signal reception signal (also independent setting
of summer- and winter time).
Manual signal reception
Hold the REC button to manually start the signal reception mode.
Manual time setting
Press and hold the M.SET button until the movement of the hands stops to
start manual time setting mode. Press and hold the M.SET button until the
desired time is reached. The movement will resume function again after a few
seconds of not pressing the M.SET button.
Alarm time setting
Turn the alarm set knob in indicated direction until the desired alarm time is
set.
Turn on/ off the alarm
Turn the alarm switch to the rear position, to active the alarm function and the
alarm will ring with a beep alarm when the set alarm time is reached. Turn it to
the front position, to deactivate the alarm function.
Note: If the alarm is not interrupted or turned off, it stops automatically after 2
minutes and rings again after 12 hours.
Snooze alarm & light
Press the SNOOZE/LIGHT button (at the top of the case) during an active
alarm sound to stop the alarm and activate the snooze function. The alarm will
EN3
Publicidad
