Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Chose your preferred mounting location for the
system. Locate and mark the center of all studs within a
26 inch span on the installation wall.
Use a stud finder to help locate
PRO TIP
the center of all studs.
2. Place the Horizontal Top Track (A) against the wall
at a recommended 84 inches from the floor. Use the
Magnetic Level (CC) to make sure Top Track (A) is
straight. Mark center, furthest left, and furthest right
(hitting as many studs as possible).
You can customize your system and
PRO TIP
hanging height to fit your needs. Check
out the "OPERATING INSTRUCTIONS"
section for configuration examples
Find helpful install videos and tips at lowes.com
1
2
6
26"
A
84"
Publicidad
