Descargar Imprimir esta página

iBACheck T5 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

English
Note
(1) To achieve an accurate reading, user should ensure that there is no
alcohol residue inside the chamber before starting a new alcohol test.
(2) After any 4 consecutive tests, allow the device to rest for 2 minutes.
(3) When the product is unused, please store it in a dry environment.
(4) When low battery indicator flashes, the reading is invalid, please
replace the batteries immediately.
(5) If the difference between two successive reading is >0.1‰, user
should test again.
(6) If very high concentration is tested (above 2.0‰), user should wait for
at least 3min to preform another test)
( 7 ) When battery indicator flashes, please recharge the battery
immediately. Connect the provided charge cable to USB port and the
RED charge icon will turn on. This indictator will switch offf automatically
if battery is fully charged.
Specification
(1) Range: 0.10 ~ 2.00 ‰ BAC (0.010 ~0.200%BAC)
(2) Power Input: 1 x 3.7V AAA Li ion battery
(3) Display: Digital LCD display with bi-color Backlighting
(4) Default unit: ‰ BAC (USA %BAC)
(5) Auto Power Off: 15 seconds
(6) Breath Sampling: =>5 seconds continuous breath sample
(7) Cycle Time: ~25 seconds
(8) Dimension: About 12 x 6.5 x 2.4(cm) / 4.72 x 2.56 x 0.94(inch)
(9) Weight: About 40g (without battery)
(10) Alert Level Calibrated: 0.5‰BAC (USA 0.05%BAC)
(11) Agency Approval: CE, UKCA, FCC
(12) Accessory: 4 pcs Blowing tubes;
Specification subject to change without notice
04

Publicidad

loading

Productos relacionados para iBACheck T5

Este manual también es adecuado para:

Aat168n