GreenWorks CSF401 Manual Del Operador página 15

Problem Possible cause
The machine
does not start.
The chain brake
is engaged.
The machine
and battery are
not connected
correctly.
The battery level
is low.
The lock out but-
ton and the trig-
ger are not push-
ed at the same
time.
The battery is
too hot or too
cold.
The motor runs,
The machine is
but the chain
in the protection
does not cut cor-
mode to protect
rectly, or the mo-
the PCB.
tor stops after
around 3 sec-
onds.
The battery is
not charged.
The chain is not
lubricated.
Incorrect battery
storage tempera-
ture
13 TECHNICAL DATA
Voltage
English
Solution
Pull the chain
brake in the di-
rection of the
user to disen-
gage it.
Make sure that
the battery re-
lease button
clicks when you
install the battery
pack.
Charge the bat-
tery pack.
1. Push the
lock-out but-
ton and hold
it.
2. Push the trig-
ger to start
the machine.
Refer to battery
and charger
manual.
Release the trig-
ger and start the
machine again.
Do not force the
machine to cut.
Charge the bat-
tery. Refer to the
battery and
charger manual
for correct charg-
ing procedures.
Lubricate the
chain to de-
crease the fric-
tion. Do not let
the guide bar
and the chain
operate without
sufficient lubri-
cant.
Cool the battery
pack until it de-
creases to the
ambient temper-
ature.
40 V DC
No load speed
Guide bar length
Chain pitch
Chain gauge
Drive links
Chain oil capacity
Weight (without battery
pack)
Chain
Guide bar
14 LIMITED WARRANTY
LIMITED WARRANTY
GARANTIE LIMITÉE
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
of three (3) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion, will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been purchased
or rented for industrial/commercial use, and that have
been maintained in accordance with the instructions
in the owners' manual supplied with the product when
new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
15
10.5 m/s
16" (406 mm)
3/8" LP (9.5 mm)
0.043" (1.1 mm)
56
180 ml
8.2 Ibs (3.7 kg)
90PX056X/
CL14356/90X-56E
164MLEA041/
M1431656-1041TL/
ES164MLEA041
3
YEAR
ANS
AÑOS
GARANTÍA
LIMITADA
EN