Descargar Imprimir esta página

Chicco BebeCare Seat Up Manual De Instrucciones página 40

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 70
Never use abrasive detergents or solvents. Do
not spin dry the cover and leave to dry
without wringing out. The fabric cover must
only be replaced with another cover ap-
proved by the manufacturer,
since it is an integral part of the child car seat
and, therefore, one of its safety features.
WARNING! To ensure the safety of the child
car seat, never use it without its fabric cover.
To remove the fabric cover follow the instruc-
tions below:
- Remove the headrest beginning with the
top part (Fig. 54)
- Remove the elastic from the diagonal belt
guides (B) (Fig. 55)
- Remove the elastic attached to the headrest
(Fig. 56)
- Remove the seat cover starting from the top
(Fig. 57).
How to clean the plastic or metal parts
Clean the plastic and coated metal parts with
a damp cloth only. Never use abrasive deter-
gents or solvents. The movable parts of the
child Car seat must not be lubricated.
CHECKING THE CONDITION OF THE COM-
PONENTS
It is recommended to regularly check the con-
dition of the following components to make
sure they are not damaged or worn:
• fabric cover: check that the padding does
not come out from the seams.
Check the condition of the seams: they must
always be intact and undamaged.
• belts: check that the fabric lining is not frayed
or the harness strap worn out in the parts cor-
responding to the adjustment strap, crotch,
shoulders and harness adjustment plate.
• plastic parts: check that the plastic parts are
not worn out, damaged or faded.
WARNING! If the child car seat is damaged,
deformed or worn out, it must be replaced,
as its original safety features may have been
compromised.
STORING THE PRODUCT
When it is not fitted in the car, it is advisable
to store the child car seat in a dry place, away
from sources of heat and to protect it from
dust, humidity and direct sunlight.
DISPOSING OF THE PRODUCT
When the child car seat no longer complies
with the original safety standards, stop using it
and dispose of it to an appropriate collection
point. Dispose of it always following environ-
mental rules and regulations adopted within
the country of use.
WARRANTY
The product is guaranteed against any con-
formity defect in normal conditions of use as
provided for by the instructions.
The warranty shall not therefore apply in the
case of damage caused by improper use, wear
or accidental events.
For the duration of warranty on conformity
defects please refer to the specific provisions
of national laws applicable in the country of
purchase, where provided
40

Publicidad

loading