Publicidad
Idiomas disponibles
Idiomas disponibles
5.
Insert the remote bolt into the ceiling bracket.
6.
Connect the cables which come out of the down rod and the connection
strip located on the remote bolt bracket. Proceed to connect the cables
which hang from the ceiling at the connection opening (ensure that the
circuit breaker has been lowered and that you follow the cable colours).
7.
Loosen the screws on the ceiling bracket so you can pass their heads
through the holes on the ceiling rose. Once past, you can rotate the rosette
so the screws go through the rail. When it has reached the end of its travel,
tighten the screws so that the rosette does not move.
2x
30
Publicidad
