Basic safety guidelines
Security symbols
WARNING
This symbol indicates that there is a potential imminent danger to physical integrity and life. Ignoring the
instructions can lead to damage to the product and to the user.
INFORMATION
This symbol indicates suggestions and especially practical information can be found below. This symbol
indicates suggestions and practical information for appropriate handling of Master Products equipment.
Ignoring this advice could result in misuse of the article.
User safety
+
The article is designed to be installed with the MT Tumbler 500 and MT Tumbler 500 MED.
It is important to handle the article using safety gloves.
+
+
The trimmers must be switched OFF and disconnected from the power supply whenever adjustments are required to the
article.
Who can use the Trim Filter
The Trim Filter can only be used by people who have read and understood the use and maintenance manual.
The Trim Filter is inherently safe when used correctly. Nevertheless, various risks may exist if used by untrained staff or if
not used correctly.
Repairing the Trim Filter
Only qualified staff can dismantle, repair and install new parts. If the product is within its warranty period, only a Master
Products engineer is allowed to make any changes without voiding the warranty.
Disclaimers
Modifications on Master Products machines without the approval of the manufacturer are forbidden. The manufacturer
withdraws the warranty from any modified machine and does not accept liability for any failures and accidents that may
result.
During the warranty period, Master Products machines may only be dismantled and repaired by the manufacturer's engi-
neers or official representatives.
The operator using the machine must check that accumulated materials are regularly removed. Anything left behind could
become an obstruction and therefore cause the machine to malfunction.
Transport
Electrical connection
10
Box 130 x 85 x 115 cm = 157 kg // Aspirator net weight = 98 kg
230 V 50/60 Hz single phase power supply.