Master Trimmers Trim Filter Manual De Uso página 12

Connect the container (F) to the collector cover and
5
tighten the hose clamp (N).
Connect one end of the air hose (E) to the input of the
7
aspirator (B) and the other to your trimmer with the
hose clamp (N).
Check and secure the Trim Filter components.
9
Checks to be performed before connecting
Ensure that the Trim Filter and trimmer hoses are properly connected and secured to avoid being dislodged
+
during use.
+
Check the cleanliness of the aspirator and air hoses. Accumulated debris could lead to clogging of the suction
tube and therefore a lack of suction and possible damage to the aspirator.
Maintenance
The cyclonic system prevents the leaves from going through the turbine, reducing the need for cleaning and preventing
surface wear. It's recommended to clean its surface with Master Clean.
12
Connect the air hose (D) to the input of the cyclonic
6
filter (B) and tighten it with the hose clamp (N).
Connect the other side of the air hose (D) to the
aspirator (A) output and tighten it with the other
hose clamp (N).
Fit the aspiration bag to the joint of the aspirator
8
(O) and fasten it with the rubber band.
Attach the Trim Filter to an power supply and... start
10
working!
ES ES