EINHELL TE-TS 36/210 Li Manual De Instrucciones página 25

9. Cleaning and maintenance
HAZARD!
Always take the battery out of the equipment be-
fore starting any cleaning work.
Take out the rechargeable battery each time be-
fore carrying out any adjustments, maintenance
or repairs.
9.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it down with compressed air at
low pressure.
•
We recommend cleaning the equipment im-
mediately each time after use.
•
Clean the equipment regularly with a damp
cloth and some soft soap. Do not use
cleaning agents or solvents; these may be ag-
gressive to the plastic parts in the equipment.
Ensure that no water can get into the interior
of the equipment. The ingress of water into
an electric power tool increases the risk of an
electric shock.
•
Regularly clean the dust collector (37). To do
so, undo the recessed head screw (17) and
pull the dust collector (37) out at the back of
the machine (Fig. 41). Carefully clean the dust
collector (37) and fit it securely back on the
circular saw in reverse order.
9.2 Maintenance
There are no other parts inside the equipment
which require maintenance.
Anl_TE_TS_36_210_Li_USA_SPK7.indb 25 Anl_TE_TS_36_210_Li_USA_SPK7.indb 25
EN
10. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
11. Storage
Store the equipment and its accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its origi-
nal packaging.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and pa-
pers accompanying the products is strictly subject
to the express consent of Einhell Germany AG.
Subject to technical changes.
- 25 -
07.10.2022 09:39:59 07.10.2022 09:39:59