Publicidad
Idiomas disponibles
Idiomas disponibles
1.
PRECAUTIONS FOR INSTALLATION AND USE
1. When installing the toilet, please do NOT pour cement mortar into ANY cavity of the toilet or
elsewhere, to avoid cement setting and expanding to crack the toilet bottom.
2. Please do NOT discard into the toilet newspaper, diapers, sanitary pads, or other items that are
likely to clog the toilet.
3. Please do NOT use the toilet when the ambient temperature is below 32°F, or the water will freeze
and expand resulting in cracks to the ceramic body.
4. Please do NOT impact the ceramic body with hard objects, to avoid breakage or water leakage.
5. Please use a nylon brush and soap water or neutral detergents to clean the ceramic surface. Do
NOT to use wire or highly corrosive solvents in order to avoid damaging glaze and corroding pipes.
6. Secure locking caps onto bolts.
2.
TOILET INSTALLATION
1. Remove the toilet seat by lifting up on the inside
back right. As shown in diagram 1.
NOTE: Avoid excessive pulling on the toilet
seats cover.
Parts Used
A
Toilet
2. Once the seat is removed, disconnect the
water connection hoses from the toilet seat and
install the 9V seat cover battery. For reference,
note the diagram below as well as "replacing your
back up battery" stated in this instruction manual.
Parts Used
A
Toilet
Hardware Used
II
9V Seat Cover Battery
1
x 1
2
x 1
x 1
Push to open battery box
9
Lift Up
Toilet Seat
Toilet Seat Cover
A
II
A
Publicidad
