Publicidad
Idiomas disponibles
Idiomas disponibles
These instructions are intended to properly inform the operator on how to use the airbrush.
Should be saved along with it, so as to be easily found and consulted in case of need.
ATTENTION: Do not use the airbrush in the presence of open flames, indoors or saturated by vapors and never go to people
or yourself.
When painting, use protective equipment, however it is always advisable to use non-toxic paints.
When the airbrush is not in use disconnect from air supply.
Save paint products in a safe place and mostly out of the reach of children.
Before proceeding with the painting operation, make sure that the supply pressure is included between 1.5 and 3.5 bar,
that the joints are correctly tight, without ink in the reservoir.
Open the tap line and pull the trigger, verifying that the airbrush work and the air exits the nozzle. Prepare the paint,
thinners, solvent and other materials for cleaning to take them successively at hand.
Check the surface to be treated in a way that is perfectly clean, cover in detail the parts that should not be painted with
shades.
After carefully mix the paint in a container, pour it into the reservoir, filling it for about 2/3 of its capacity, close carefully
and then make a test on a surface alternative. East airbrush Nipple perpendicular to the surface to be treated, and keep it
at a distance of 20/30cm.
Never stop at a point without having loosened the trigger.
The knob regulates the amount of ink output, the opening of the fan and hence the amplitude of the paint.
At the end of the painting operation, or to interrupt it for a prolonged time, to eliminate any accumulations of paint, carefully
wipe the ink reservoir using a brush wetted with solvent and immerse the nozzle for a few minutes in a container containing
the solvent.
Following, dry with a jet of clean air.
ATTENTION: Never leave the airbrush, for a successive use, with ink on the reservoir or immerse completely in the solvent
for cleaning. Some components will be certainly damaged. Any waste ink and cleaning products should be disposed of
according to regulations. Replace worn or damaged components with original spare parts.
The warranty for this product is in accordance with the law in force from the date of purchase. You should, therefore, keep
your proof of purchase during this period. The warranty covers any manufacturing defect in material or operation, as well
as parts and work needed for their repairing.
Excluded from the warranty are the misuse of the product, any repairs carried out by unauthorized individuals (outside the
service center of the brand VITO) as well as any damage caused by its use.
Publicidad
