Nexxt Solutions NHB-S611 Guia Del Usuario página 9

Power on the smart light strip. You must connect to a
2.4GHz Wi-Fi network. Enter your network password.
Make sure you enter the correct password, otherwise the
device will not connect.
Step 2
9:41 AM 60 %
9:41 AM
Power on the smart light strip. If it fails to blink, reset the
smart light strip. Turn it off from the switch, wait 5 seconds
before turning it back on again. Tap on Confirm the light
blinks rapidly.
Step 3
60 % 9:41 AM 60 %