Publicidad
Idiomas disponibles
Idiomas disponibles
Advanced configuration
Advanced configuration
With the device switched off, press and hold the SET and POWER buttons simultaneously to enter the
advanced configuration mode. This mode allows modification of the values: ROOM, TEST, D1, D2 and D3.
When you have finished the configuration, press the POWER button..
ROOM: this setting can have 16 different values (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E or F). This
-
value must coincide in the main unit and in the microphones for its correct data communication. It is
recommended that this value be modified only when there are several systems in the same building
operating at the same time; thereby preventing interference in the communication between the main unit
and the microphones.
-
TEST: modifying this value is not recommended.
D1, D2 & D3: these settings allow the receiver delegate channels 1, 2 and 3 to be modified. This device
-
assigns the channels to the delegates depending on the last one active, in other words, to activate a
second microphone revise the status of D1 channel; by activating another microphone the D2 status will
be revised, etc. If the channel is damaged the system will block all channels after the damaged one. In
order for the equipment to ignore the damaged channel and be able to use the subsequent ones, you
must deactivate this channel using these settings of D1, D2 and D3. Use the 0 value to deactivate the
channel and 1 to activate it.
Locking the configuration buttons
The configuration button can be locked by pressing SET and the w button. To unlock these buttons, press
SET and the s button.
REPRODUCTOR/GRABADOR
The player of this conference equipment allows you to play any audio file either from a mobile device, a USB
memory stick or from other devices connected via USB cable such as computers. It also records the audio
received from active microphones during a conference on a USB memory storage device.
To navigate through the menus, use the { and } to move around the menu and press 12 to select the
required option. A long press of the MENU button will take you to the main menu.
The main menu of this player/recorder has 5 options:
-
MUSIC: pto play audio files contained in a USB memory stick. Press 12 to enter MUSIC mode. Press 12
to start playing. Also, this mode has a configuration menu, press MENU to display the settings:
+ EQ: Normal, Pop, Rock, Jazz and Classic
+ Volume
+ File Browsing: allows selection of folders or files contained in the USB memory stick.
+ Play Mode: all, repeat one, repeat folder and random
(use the { and } to move around the menu and press 12 to select the required option)
RECORDER: to record a conference in a USB memory stick. Press 12 to enter RECORDER mode.
-
Press 12 to start the recording and press 12 again to exit the recording, the system will automatically
save the file as REC0001.mp3, REC0002.mp3, etc. in a folder named AB_REC
USB DEVICE: to play audio files from a computer or laptop connected by USB cable. Press 12 to enter
-
MUSIC mode. Press 12 to start playing.
SETTINGS: allows to change the following settings. Press 12 to enter SETTINGS mode:
-
+ Language: change the language of the display.
+ Contrast: change the contrast of the display.
+ Firmware Version: shows the version of the firmware installed.
+ Factory Settings: revert the settings to factory settings.
(use the { and } to move around the menu and press 12 to select the required option)
- 5 -
EN
Publicidad
