Publicidad
Idiomas disponibles
Idiomas disponibles
GB
and the smartphone. Make sure that the smartphone supports inductive
charging.
Wireless headset:
Place the Qi-enabled case of the wireless
headset in the center of the wireless charging area. The charging
process will start.
Smartwatch:
Place your Qi-enabled
smartwatch in the middle of the wireless
charging area. The charging process starts.
The charging area can be pulled outward so
that the Watch can be charged vertically,
horizontally, or even with the band closed.
NOTE: There should be no metal objects between the charger and
the smartphone.
Safety instructions:
• Never open the device.
• Do not immerse the device in water and protect it from moisture.
• Place the device only on flat surfaces.
• Never connect the device by force.
• Unplug electronic devices if they are not going to be used for a long
period of time.
• Do not place cards with magnetic strips, magnetic recording media or
metal objects on the charging surface. Charging does not take place
and can lead to overheating!
• If necessary, remove the case before placing your smartphone on the
charging base.
• Wearers of pacemakers should keep a sufficient distance between the
charger and the pacemaker. Consult the attending physician in case
of doubt.
• This product may impair the function of medical equipment. Therefore,
do not use it in clinics and medical facilities.
• Never use the product if it shows visible damage.
No liability is accepted for damage in the event of incorrect operation!
Troubleshooting:
If charging is interrupted or stalls, check the following:
• There should be no metal parts or credit cards on the back of the de
vices to be charged.
• Place the devices to be charged in the center of the inductive charging
surface.
• Cell phone cases should not be thicker than 5 mm to ensure efficient
charging.
• Check if the USB charger is a fast charger.
5
Specifications:
• Input: 5.0V/2.0A, 9.0V/2.7A, 12.0V/2.0A
• Output: 5.0V/1.0A, 9.0V/1.2A, 9.0V/1.67A
• Smartphone charging point: 5.0W/7.5W/10.0W/15.0W
• Headset charging point: 5V/600mA - 3W
• Watch charging point: 5V/500mA - 2.5W
• Total power: 20.5W max.
• Transmission range: ≤6mm
• Efficiency: ≤ 78%
• Connector: USB Type-C
• Safety: short-circuit protection, overcharge and discharge protection,
foreign object detection, overheat protection.
• Material:ABS with rubber coating
• Weight:170g
• Dimensions:169 x 74 x 20mm (folded).
If you need technical support, please contact our support team by email
at service@fontastic.eu.
Registration and Safety
Certification/General Information
We hereby declare, that this device carries the CE mark in
accordance with the regulations and standards. It conforms
with the essential requirements of the EMC Directive 2014/30/
EU, as well as the RoHS 2 2011/65/EU directive. You can find
the complete declaration of conformity under
www.d-parts.de/Konfo.
Note on environmental protection:
After the implementation of the European Directive 2012/19/EC
in the national legal system, the following applies:
Electrical and electronic devices may not be disposed of with
domestic waste. Consumers are obliged by law to return
electrical and electronic devices at the end of their service lives to the
public collecting points set up for this purpose or point of sale. Details of
this are defined by the national law of the respective country.
This symbol on the product, the instruction manual or the package
indicates that a product is subject to these regulations. By recycling,
re-using the materials or other forms of utilising old devices, you are
making an important contribution to protecting our environment.
GB
6
Publicidad
