Steinberg Systems SBS-SB-9/4.2 Manual De Instrucciones página 20

A. Hook for hanging the device
B. Hook for attaching the safety line
C. Shield for weight adjustment
D. Additional hook for safety line (selected models)
E. Carabiner to hang the tool
F. Safety cord lock
G. End piece for counterweight adjustment (varies according to model).
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 35°C and ambient humidity should not
exceed 5%. Use the device in properly illuminated spaces. Keep the unit away from
any hot surfaces. Always keep the device out of reach of children and persons with
reduced mental, sensory or intellectual functions.
CHOOSING THE RIGHT MODEL
When selecting a model for a given application, consider the total weight of the tool
that will be suspended from the spring balancer, i.e. the weight of the tool plus any
accessories.
Use the following formula for selection:
weight of the tool + weight of the accessory = kg = range within min/max working
tool 14 kg + accessory 3 kg = 17 kg = correct balancer working load range: 15-22 kg
IMPORTANT: In case the total weight of the tool and the accessory is within the
extreme upper limit of the working load range of the balancer, choose a balancer
with a higher range.
This will ensure longer product life. If one of the tools on the balancer is a little too
load of the balancer
e.g.
(model SBS-SB-22/5.1)