Descargar Imprimir esta página

Zeegma Vitamine Go Manual De Usuario página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
components. Do not pull it over sharp edges.
7.
The device is for domestic use only. The device is not suitable
for outdoor use. Do not use it for other purposes incompatible
with its intended use.
8.
The device is not intended for commercial use.
9.
After use, during assembly, disassembly, changing accessories
and cleaning, the device must be turned off and disconnected
from the power supply.
10. The device may be used by persons with limited physical, sensory
or mental abilities, as well as persons without relevant knowledge
and experience in the use of the device, if they are supervised
or have been previously instructed on the safe use of the device
and the risks involved.
11. Be especially careful when using the device when children are
around. Do not allow children to play with the device. Keep the
device and the power cord out of the reach of children. The
device shall not be used by children.
12. Be particularly careful when handling the blades and when
cleaning the device.
13. Before use, make sure that the glass container is properly
attached to the body of the device, and the lid is properly
closed. Do not remove the container while the device is running.
14. Do not blend hard ingredients such as coffee beans, nuts, shells,
seeds, etc. This may lead to damage to the device.
15. Use the device only with original accessories according to their
application, taking all precautions. Use only original spare parts.
16. Avoid contact with moving parts of the device. Do not put
anything into the device while it is running, to avoid personal
injury and damage to the device.
17. Do not make any modifications to the device.
18. Do not use the device to blend hot liquids and meals.
19. Do not use the device to prepare potato puree, whip egg whites,
stir hard dough or grind raw meat.
20. The device is equipped with a thermal cut-out to prevent damage
to motor in case of extreme overloading. When the blender
stops working, switch the device off and leave for 15 minutes
EN

Publicidad

loading