Publicidad
Step 2
Quick Settings
1
Add Alarm Hub
- Log in the EZVIZ app.
- On the Home screen, tap "+" on the upper-right corner to go to the scan QR code page.
- Scan the QR code at the buttom of the Alarm Hub.
- Hold and press the Setting Button on the Alarm Hub to enter Wi-Fi configuration mode.
- Follow the EZVIZ app wizard to finish Wi-Fi configuration.
• Make sure the mobile phone is connected to the 2.4GHz Wi-Fi network and the is not
connected to any Wi-Fi network, or the connection fail.
• For best result, place your phone no more than 2ft. from the Alarm Hub during the adding
process.
2
Complete Configuration
Once the Alarm Hub has successfully connected to the Wi-Fi network, the yellow indicator starts to
blink and a voice prompt "Wi-Fi connected" will be heard from the Alarm Hub.
If the connection failed or you want to reconfigure Wi-Fi, please press and hold the RESET
button with a needle and release until the 3 indicators flicker at the same time for once to
reset and repeat the steps above.
2
Publicidad
