CruxCare C2 Manual Del Usuario página 8

5.1 CruxCare call buttons red and blue CCCB01R and CCCB02B
Calling the carer
Press the red or blue call button. The button will light up as a sign that a signal
was sent.
Stop the notification sound
Stop the sound at any time by pressing the "STOP" button on the CruxCare C2
Pager for about 1 second.
Installation
This device can be worn around the neck using a lanyard. Alternatively, mount
the call button to a fixed position by using double-sided adhesive pads.
Power supply: 1 x CR2450 battery
Dimensions: 5,5 x 5,5 x 2 cm
Housing material: ABS
Radio-frequency: 433 MHz
5.2 CruxCare call button Pro CCBS-01 (selected countries only)
Wireless patient handset with Call and Reset buttons for use at the bedside,
wheelchair or similar locations. When a call was made, the patient or caregiver
can decide to stop the notification sound on the C2 Pager by pressing the green
"C" button.
Calling the carer
Short-press the red call button to call for assistance or help. The red light will
light up for the transmitted signal's whole duration (about 10 seconds).
6