Fagor SP-350 Manual De Instrucciones página 11

•
Unplug the appliance before cleaning
or maintenance.
• In the event of fault or malfunction
where the appliance is not to be used,
turn off the appliance and do not
attempt to repair. If a repair is required,
contact a Technical Assistance Service
authorised by the manufacturer and
request the use of original spare parts.
• If the cable for this appliance is
damaged, contact an authorised
Technical Assistance Service for it to be
replaced.
• Do not leave the appliance exposed to
the elements (rain, sun, ice, etc.).
•
Do not use or let any part of the
appliance come into contact or near
hot surfaces (kitchen gas or electric
hobs or ovens).
• Do not use detergents or abrasive
sponges to clean the appliance.
• Do not touch the hot surfaces. Use the
handles.
• Do not let the cable come into contact
with the hot parts of the appliance.
• This appliance must not be used to
stir or mix paints or varnishes such as
flammable solvents.
• The accessories must be fitted and
removed whilst the appliance is
unplugged.
• Before switching on the appliance,
check that the accessories you are
going to use are fitted correctly to the
appliance. Wait until the accessories
have completely stopped before
removing them from the appliance.
• Avoid touching the moving parts whilst
the appliance is in use.
•
The mixer must not be used
continuously for more than 3 minutes.
•
Do not use the Turbo function for more
than 1 minute continuously.
•
Keep your hands, hair, clothing and
other utensils well away from the
blades during use.
•
Do not use the blades to mix
ingredients which are too solid.
4. ASSEMBLY
The accessories must be assembled
and dismantled whilst the appliance is
unplugged.
Assembly and use of the liquidiser
attachment
• With the appliance unplugged and the
speed selector (3) in the "0" position,
slide the protective cover (6) upwards
(fig. B).
• Fit the liquidiser attachment (9) to the
mixer unit. To do this, align the arrow
▼ of the mixer unit (5) with ▲ of the
liquidiser attachment (9) and turn the
liquidiser attachment clockwise as far as
it will go (Fig. C).
• Put the liquidiser attachment (9) into the
bowl containing the ingredients.
• To remove the liquidiser attachment from
the mixer unit (5) turn the attachment
anti-clockwise until the arrows ▼ and ▲
are aligned, then remove the liquidiser
attachment from the mixer unit.
Assembly and use of the dough hooks (8)
and mixer blades (7)
• With the appliance unplugged, place the
speed selector (3) in the "0" position.
• To fit the dough hooks (8) or mixer
blades (7), hold the mixer handle with
one hand and the attachment with the
other:
- Mixer blades: insert the blades until
they are locked into position as
shown in figure D.
- Dough hooks: insert the blade with the
larger washer into the right-hand hole
until it is firmly in position. Repeat the
same procedure to fit the blade without
the washer into the left-hand hole (Fig.
E). If you do not assemble them in this
way, the food you are processing may
come out of the bowl.
• Plug in the appliance and put the blades
into the middle of the ingredients you
are going to process.
• To remove the blades, press the
attachment eject button (1) and pull the
blades out (fig. F).
10