Integra Xmart OPTIMA-33 T10 Manual Del Usuario página 83

13.- ERRORES, ALARMAS Y SOLUCION PROBLEMAS
CODIGO DE
FALLA DESCRIPCION DE LA FALLA (ERROR)
(ERROR)
1 Bus Start failure
2 High BUS Voltage
3 Low BUS Voltage
4 Bus Unbalanced
6 Converter Over Current
11 Inverter soft start failure
12 Inverter High voltage
13 Inverter Low voltage.
14 Inverter A (L1) output line to neutral short-circuit
15 Inverter B (L2) output line to neutral short-circuit
16 Inverter C (L3) output line to neutral short-circuit
Inverter A-B (L1-L2) output (line to line) short
17
circuit detected.
Inverter B-C (L2-L3) output (line to line) short
18
circuit detected.
Inverter C-A (L3-L1) output (line to line) short
19
circuit detected.
1A Inverter A (L1) Negative Voltage failure
1B Inverter B (L2) Negative Voltage failure
1C Inverter C (L3) Negative Voltage failure
21 Battery SCR Short-Circuit
23 Inverter Relay Open-circuited
24 Inverter Relay Short-circuit
25 Line Wiring Fault
31 Parallel communication failure
41 HIGH Temperature.
42 DSP communication failure
UPS Overload: High power consumption in Watts
43
at UPS output.
CODIGOS DE ERROR / FALLA EN PANTALLA LCD
En caso de producirse un error de funcionamiento o una falla en el UPS, se presentará en la pantalla del UPS el código y descripción del error que
permitirán identificar el problema, el cual deberá ser atendido por el servicio técnico. Los códigos de error van acompañados por una alarma
continua y notoria, para facilitar la identificación de la situación.
La siguiente tabla lista los códigos y descripción de las fallas para esta familia de UPS:
www.xmart-ups.com
USER MANUAL – OPTIMA-33-T10 10K-80K
CODIGO DE
FALLA DESCRIPCION DE LA FALLA (ERROR)
(ERROR)
45 Charger Fault.
46 Incorrect UPS setting.
47 MCU communication failure
61 Bypass SCR short-circuited
62 Bypass SCR open-circuited
63 Voltage waveform abnormal in R phase (L1).
64 Voltage waveform abnormal in S phase (L2).
65 Voltage waveform abnormal in T phase (L3).
66 Inverter current sample abnormal
67 Bypass output short-circuited
68 BYPASS output LINE to LINE short-circuited
69 Inverter SCR short-circuited
6C BUS voltage drops too fast
6D Current sampling error value
6E SPS power error
6F Battery polarity reverse
71 Rectifier IGBT overcurrent in R phase (L1).
72 Rectifier IGBT overcurrent in S phase (L2).
73 Rectifier IGBT overcurrent in T phase (L3).
74 Inverter IGBT overcurrent in R phase (L1).
75 Inverter IGBT overcurrent in S phase (L2).
76 Inverter IGBT overcurrent in T phase (L3).
77 ISO Over temperature fault
78 LCD & MCU communication failure
Ver 2212.07
81