pico Technology MT03A Guía De Seguridad página 6

MT03A Milliohm and Motor Tester
For proper operation, always use the high-quality blue USB cable supplied with the product.
Note: The product is powered through the USB connector. No additional power supply unit is
required.
Note: Maximum power requirement from the 5 V USB supply is 2.5 W.
ENVIRONMENT
This product is suitable for indoor use, in dry locations only.
To prevent injury or death, do not use in wet or damp conditions, or near explosive gas or vapor.
To prevent damage, always use and store this product in appropriate environments.
Temperature
Humidity (non-condensing)
Altitude
Pollution degree
CARE OF PRODUCT
The product and accessories contain no user-serviceable parts. Repair, servicing and adjustment
require specialized test equipment and must only be performed by Pico Technology or an
approved service provider.
Inspect the instrument and all connectors, cables and accessories before use for signs of
damage.
To prevent electric shock do not tamper with or disassemble the product, case parts, connectors
or accessories.
When cleaning the product or accessories, use a soft cloth and a solution of mild soap or
detergent in water. To prevent electric shock, do not allow liquids to enter the product casing or
accessories, as this will compromise the electronics or insulation inside.
6 Copyright © 2023 Pico Technology Ltd. All rights reserved.
CAUTION
WARNING
CAUTION
Storage
–20 to 60 °C
(–4 to 140 °F)
5 to 95 %RH
Up to 15 000 m
(49 200 ft)
WARNING
WARNING
Operating Quoted accuracy
0 to 40 °C
(32 to 104 °F)
5 to 80 %RH
Up to 2 000 m
(6 560 ft)
2
Safety Guide
15 to 30 °C
(59 to 86 °F)
DO363-1