TRAPP WM-350 Manual De Instrucciones página 21

www.trapp.com.br
5
12
13
3
Assemble as shown in the pictures:
Start by attaching the 3 rear clamps (Fig 1) and

so on for both sides.
For proper operation of the WM-350 lawn

mower, use the grass catcher.
1 1
1
1
Fixing the Handle to the Base
4
2
6
7
9
8
1
2
3
11
10
Assembly of Grass Catcher
2 2
2
2
For fixation of the cable to the base, proceed
as follows:
Attach the lower cable (1) in base hole (3) and

use the screw (10) in both sides of the base by
adjusting the lower cable hole with the base
hole (11) as shown below.
In the upper cable (2), attach the two brackets

to extension (4) tightening the nut (5) and
screw (6) and introduce the wring support (7).
To accomplish the fixation of the lower cable

(1) with the top (2) make use of wing nut (8) and
screw (9), pressing them on both sides.
For fixation of the electrical cable (12) in the

lower cable (1), use the bracket (13).
3 3
3
3
4 4
4
4
11
21