Twin-Star International 33WM154 Instrucciones Para El Montaje página 5

ELECTRIC
FIREPLACE INSERT
E-4
MANTEL/TOP
G
COMPLETED
ASSEMBLY
Completed
Unit
INSTALL
INSERT
FROM BACK
9. Insert one Wood Dowel(N) into each of
the pre-drilled holes on the top edges of
the Assembly from step 8.Then locate
Mantel/Top (G) and lay finished side up
on top of completed assembly. From the
inside, attach the Mantel using Bolt (L)
and Washer (M) through the pre-drilled
holes in the mounting blocks.
HAND TIGHTEN ONLY.
10. Using Phillips head screwdriver
tighten all Bolts alternating top and
bottom, left and right.
11.Remove the two mounting brackets
attached to the back ofthe Left and
Right Front panels.Set aside with the
wood screws.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT"
INSTRUCTIONS PRIOR TO
INSTALLING ELECTRIC INSERT
IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL
THE INSERT IN YOUR
FIREPLACE CLOSE TO ITS
FINAL POSITION.
12.Lift insert carefully into the back ofthe
unit and center in the insert opening.
Do not drag insert across Hearth/Base
(A) as it may scratch your unit.
13.Install the mounting brackets to hold
insert flush against the inside of the
mantel front panel.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES.
MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO
PEOPLE TO MOVE COMPLETED
UNIT INTO ITS FINAL POSITION.
Twin-Star International, Inc.
Delray Beach, FL 33445
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 33WM154
Made in China
Printed in China
© 2009, Twin-Star International, Inc.