OK. ORD 300 Manual De Instrucciones página 18

EN
Storing FM stations
You can store up to 20 preset FM stations.
1. Select the desired FM station.
2. Press and hold the PRESET button for one second and then confirm by pushing
ENTER so that <Preset 1 stored> appears on the display.
3. Repeat steps 1 to 2 to store more FM stations.
Note: If there is already an existing FM station stored under a preset, it will be over
written when you store the new station.
Selecting a preset FM station
If necessary, press the PRESET button.
1.
2. Press the + or – button to select a saved station.
Using the FM menu
1. Press and hold MENU in FM mode and select a menu option with the buttons + or – :
<Alarms>
<System> (system settings)
2. Confirm selection with ENTER.
SYSTEM SETTING
Long press MENU in any mode and select <System> with the buttons + or –.
Fig. 5
Confirm selection with ENTER.
Following menu options are available:
• <Time setup>
• <Bass>
• <Treble>
• <Announcement>
• <Language>
• <Factory Reset>
• <SW Version>
ALARM
Note:
Make sure the time is set correctly.
Press and hold the MENU button until the Alarm is displayed.
1.
2. Press the button ENTER. The display will show <Alarm 1>. You can switch to <Alarm
2> by pressing + or –.
3. Press the button ENTER to select one of the two alarms.
4. Press the button ENTER again to activate or deactivate the alarms. <On> or <Off>
will appear on the display.
5. Press + or – button until the time is displayed and open by pressing the button ENTER.
All settings are accessible by Pressing + or – button and pressing the button ENTER
to confirm selection.
<Time>: set the hour and time.
<Days>: adjust the wake-up mode setting. You can select between daily, once,
weekdays and weekends.
Note: if you select the function once, the wake-up function will be activated at the
next set wake-up time.
<Mode>: You can choose between DAB+, FM or buzzer for your wake up call.
<Volume>: setting the volume.
<Save>: new settings become active once they have been saved.
6. When you are finished, press the button ENTER to save the new settings. The
display will briefly show Alarm saved.
7. You can turn off the alarm signal by pressing the button POWER or SOURCE.
8. To repeat the alarm: Press the ENTER button to select the interval time for the
alarm again. You can choose 5 minutes, 10 minutes, 15 minutes, and 30 minutes.
IM_ORD300_A5_201202_V04_HR.indb 18 IM_ORD300_A5_201202_V04_HR.indb 18
18
2/12/2020 2:21 PM 2/12/2020 2:21 PM