Princess 242000 Manual De Instrucciones página 8

Congratulations!
You have purchased a Princess appliance.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this appliance
for many years.
Description (fig. A)
Your 242000 Princess milk frother has been
designed for frothing milk and heating milk.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
The maximum capacity for frothing milk is
125 ml. The maximum capacity for heating
milk is 375 ml.
1. HEAT/FROTH button
2. AUTO CLEAN button
3. Milk frothing unit
4. Stirrer
5. Heating element
6. Stand
7. Milk jar
8. Milk level indicator
9. Jar holder
10. Cleaning brush
Initial use
• Clean the appliance. Refer to the section
"Cleaning and maintenance".
• Clean the accessories. Refer to the section
"Cleaning and maintenance".
Use (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Before filling the milk jar, switch off the
appliance and remove the mains plug from
the wall socket.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance without milk in
the milk jar. The appliance will not operate
if the milk jar is empty.
- When heating milk only, make sure that
the milk level is between the minimum
mark and the maximum mark on the milk
level indicator (fig. A).
- Do not fill the milk jar with more milk than
required. Only use the amount of milk
required for frothing the milk.
Frothing milk (fig. A)
The appliance can be used for heating and
frothing milk and for frothing milk only.
Before you proceed, we would like you to
focus your attention on the following notes:
- Before frothing milk, make sure that the
stirrer is mounted to the milk frothing unit.
- Before frothing milk, make sure that the
stand is mounted to the milk frothing unit.
Heating and frothing milk (fig. A & B)
• Place the appliance on a stable and flat
surface.
• Fill the milk jar (7) with milk (125 ml).
• Make sure that the stirrer (4) is mounted
to the milk frothing unit (3).
• Make sure that the stand (6) is mounted to
the milk frothing unit (3).
• Place the milk frothing unit (3) into the
milk jar (7).
• Place the milk jar (7) into the jar holder (9).
• Insert the mains plug into the wall socket.
• Shortly press the HEAT/FROTH button (1).
The HEAT/FROTH button (1) flashes red.
The appliance starts to heat and froth the
milk.
• To interrupt the process, press the HEAT/
FROTH button (1).
• If the process is completed, the appliance
will go to stand-by mode. The HEAT/FROTH
button (1) lights red. The AUTO CLEAN
button (2) lights blue.
• Wait for approximately 30 seconds to
achieve the best results.
• Remove the mains plug from the wall
socket.
• Remove the milk jar (7) from the jar holder
(9).
• Remove the milk frothing unit (3) from the
milk jar (7).
• Place milk frothing unit (3) into the jar
holder (9). The jar holder (9) can be used
as a drip tray.
• Pour the milk froth into a cup of coffee.
8