Publicidad
Idiomas disponibles
Idiomas disponibles
Frothing milk only (fig. A & B)
•
Place the appliance on a stable and flat
surface.
•
Fill the milk jar (7) with milk (125 ml).
•
Make sure that the stirrer (4) is mounted
to the milk frothing unit (3).
•
Make sure that the stand (6) is mounted to
the milk frothing unit (3).
•
Place the milk frothing unit (3) into the
milk jar (7).
•
Place the milk jar (7) into the jar holder (9).
•
Insert the mains plug into the wall socket.
•
Keep the HEAT/FROTH button (1) pressed
for 2 seconds. The HEAT/FROTH button (1)
flashes red. The appliance starts to froth
the milk.
•
To interrupt the process, press the HEAT/
FROTH button (1).
•
If the process is completed, the appliance
will go to stand-by mode. The HEAT/
FROTH button (1) lights red. The AUTO
CLEAN button (2) lights blue.
•
Wait for approximately 30 seconds to
achieve the best results.
•
Remove the mains plug from the wall
socket.
•
Remove the milk jar (7) from the jar holder
(9).
•
Remove the milk frothing unit (3) from the
milk jar (7).
•
Place milk frothing unit (3) into the jar
holder (9). The jar holder (9) can be used
as a drip tray.
•
Pour the milk froth into a cup of coffee.
Heating milk only (fig. A & B)
The appliance can be used for heating milk only.
Before you proceed, we would like you to
focus your attention on the following notes:
-
Before heating milk, make sure that the
stirrer is removed from the milk frothing
unit.
-
Before heating milk, make sure that the
stand is mounted to the milk frothing unit.
•
Place the appliance on a stable and flat
surface.
•
Fill the milk jar (7) with the required
amount of milk (max. 375 ml).
•
Make sure that the stirrer (4) is removed
from the milk frothing unit (3).
•
Make sure that the stand (6) is mounted to
the milk frothing unit (3).
•
Place the milk frothing unit (3) into the
milk jar (7).
•
Place the milk jar (7) into the jar holder (9).
•
Insert the mains plug into the wall socket.
•
Shortly press the HEAT/FROTH button (1).
The HEAT/FROTH button (1) flashes red.
The appliance starts to heat the milk.
•
To interrupt the process, press the HEAT/
FROTH button (1).
•
If the process is completed, the appliance
will go to stand-by mode. The HEAT/FROTH
button (1) lights red. The AUTO CLEAN
button (2) lights blue.
•
Remove the mains plug from the wall socket.
•
Remove the milk jar (7) from the jar holder
(9).
•
Remove the milk frothing unit (3) from the
milk jar (7).
•
Place milk frothing unit (3) into the jar
holder (9). The jar holder (9) can be used
as a drip tray.
•
Pour the milk into an empty glass or mug.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
-
Before cleaning or maintenance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until
the appliance has cooled down.
-
Do not immerse the appliance in water or
any other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
-
Do not use aggressive or abrasive cleaning
agents to clean the appliance.
-
Do not use sharp objects to clean the
appliance.
-
It is not recommended to wash the
removable parts of the appliance or the
accessories in a dishwasher.
-
Do not hold the milk frothing unit upside
down to prevent water and other liquids
from entering the inside of the appliance.
Always hold the milk frothing unit as
shown (fig. C).
9
Publicidad
