Publicidad
Idiomas disponibles
Idiomas disponibles
ATTENTION
Read the operating instructions and all instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these operating instructions in a safe and dry location for future reference. Enclose
the operating instructions with the product when handing over to third-parties.
FEATURES
•
Small, lightweight and portable.
•
Patented torque spring enables stability and accuracy in torque values.
•
Patented lock system that enables easy operation.
•
Patented slip structure that extends the lifespan of your torque wrench.
•
Two-way operating modes.
INTENDED USE
This torque wrench set is used for the tighten and checking of threaded fittings to a previously
specified and set torque. Use the tool set only for the purpose specified. Any other use may lead to
damage, personal injury and to termination of the warranty.
ACCURACY
• Precision difference for product torque under 10 Nm is CW 6% and CCW 8%.
• Calibration precision value for torque values 20%, 60% and 100% is CW 4% and CCW 6%.
IMPORTANT INFORMATIONS
• Keep children and other persons out of the working area.
• Do not allow children to play with this tool or its packaging.
• This torque wrench serves exclusively for the manual tightening of screws or nuts. Do not use it
for undoing or for other purposes.
• Defective screws, nuts or sockets my break suddenly. To avoid injury, keep a steady stand and
do not use the torque wrench at dangerous points or in the vicinity of rotating machinery.
• Do not extend the torque wrench when tightening as it causes inaccuracy in torque values.
• Hold the middle of the wrench handle when tightening the screw.
• The direction of force applied should be perpendicular with the torque wrench and not skewed.
• The torque wrench should not be used as a normal wrench. Do not exceed the maximum torque
value.
• Please refrain from dropping the torque wrench as this is a precision tool.
• Hex nut is for calibration purpose only, do not loosen it.
• Please set the torque value to minimum after using.
• Do not separate any parts inside the wrench so as to maintain the accuracy of the torque value.
• There are no components to be maintained by the user inside the torque wrench. Dismantling of
the torque wrench or modifications to it may lead to loss of accuracy and termination of the
warranty.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Torque Wrench | 3 - 24 Nm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 72089
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
