Publicidad
Idiomas disponibles
Idiomas disponibles
13
switch the pump from high-speed to low-speed. Pump in low-speed will turn off after 4 hours, high-speed will turn
off after 15 minutes. Low-speed may run automatically at times, during which it cannot be deactivated from the
panel, but high-speed may be operated.
4) LIGHT
Press "LIGHT"to operate the SPA light. Turns off after 4 hours.
5) BLOWER
Press"BLOWRER"to operate the Blower on or off.
6) Mode
Depending on system configuration, mode changing may not be available and will be locked in Standard Mode.
Mode is changed by pressing "TEMP", then "Light".
Standard Mode：Maintains set temperature,"St" will be displayed momentarily when you switch into Standard
Mode.
Economy Mode： Heats the SPA to the set temperature only during filter cycles."Ec" will display when water temp.is
not current, and will alternate with water temp. when the pump is running.
Sleep mode： heats the SPA to within 20F/10℃ of the set temperature only during filter cycles."SL"will display when
water temp is not current, and will alternate with water temp. when the pump is running.
7) Preset Filter Cycles
The first preset filter cycle begins 6 minutes after the SPA is energized. The second preset filter cycle begins 12
hours later.
Filter duration is programmable for 2,4,6 ,or 8 hours or for continuous filtration(indicated by "FC"). The default filter
ime is 2 hours for non-circ systems and 4 hours for circ systems.
To program, press"TEMP", then "JETS". .Press"TEMP"to adjust, and press"JETS"to exit programming.
For non-circ systems, low-speed pump 1 and the ozone generator (if install) run during filtration.
For 24 hour circulation systems, the circ pump and the ozone generator (if installed) run 24 hours. In hot
environments, the circ pump may turn off for 30 minute periods, except during filter cycles.
For non-24 hour circulation systems, the circ pump and ozone generator (if installed) run during filtration(and may
also run automatically at other times).
At the beginning of each filter cycle, all other equipment will run briefly to purge the plumbing.
3. GS100 Balboa Control System
GS100 Control System with VL260 Panel
Non-Circ Operation
Publicidad
