Publicidad
Idiomas disponibles
Idiomas disponibles
16/17
07. Installation
INCORRECT INSTALLATION OF THE MACHINE MAY CAUSE DAMAGE TO
PEOPLE. THE MANUFACTURER CAN NOT BE CONSIDERED RESPONSIBLE
FOR THESE DAMAGES
07.1. Transport and discharge
The equipment is delivered packaged. It must be transported and stored according to the indications
on the packaging. Due to the low weight of the remover can be moved by two people without using
other means.
The equipment should be stored in an uncontaminated environment away from direct sunlight
preferably packed in an enclosure.
Recommended limits of storage are 0 to +35°C with RH < 65%.
07.2. Arrangement of the lighting system
The client must make sure that there is suitable lighting for the surroundings and that the lighting
conforms to the regulations in force. In particular, the client must arrange the positioning of lighting
that illuminates all the working area.
07.3. Arrangement of the pneumatic system
The client must arrange a line of filtered compressed air supplied by a compressor that is suitable
for the consumption required.
Do not use compressed air that contains chemical products, synthetic oil with organic solvents,
salts or corrosive gases as they can cause damage or malfunctioning.
The line of compressed air must arrive up to the supply points of the machine.
If the compressed air contains a large amount of moisture, it may cause malfunctioning in the
valves and in the pneumatic components.
Install a moisture separator downstream from the compressor to avoid this.
07.4. Equipment assembly
ENGLISH
Air
Compressed air
main supply
Publicidad
