Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS
OVATION
BATH AND SHOWER
®
WALL SETS
MODELS: 2968BWT60, 2968SWT60
Visit www.americanstandard.com for coordinating products.
Thank you for selecting American Standard - the benchmark of fine quality for over 140 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.)
BEFORE YOU BEGIN....
Local building codes vary by location. Observe all local plumbing and building codes.
Unpack your new walls and inspect them carefully for damage. Verify that the walls are the correct size for your installation.
Refer to American Standard roughing-in information for specific dimensions for each model.
NOTE: Remove protective plastic coating material from surface of panel before installation.
Take extra care in handling the front surfaces of the walls. Use only non-abrasive cloths to avoid scratching.
TOOLS:
Pencil
Drill
Square
Level
PREPARATION:
Must be installed over SHEETROCK/GREENBOARD.
Illustration 1
A) WALL SURFACE PREPARATION
NOTE: For best adhesion, we suggest priming walls prior
to installation.
Ensure wall surface is dry, smooth, and free of dust, soap
scum, mold or other contaminants. Wipe wall surfaces with
a damp cloth and allow to dry.
Wall surface must be dry before panels can be applied.
Ensure that alcove is plumb and square. See Illustration 1.
Product names listed herein are trademarks of AS America Inc.
© AS America Inc. 2020
REQUIRED TOOLS AND MATERIALS
Tape Measure
Caulking Gun
Hole Saw or Jig Saw
with fine tooth blade
MATERIALS:
Waterproof Adhesive
Tub & Tile Sealant
Mineral Spirits
B) ROUGH PLUMBING & FITTINGS MUST BE INSTALLED
BEFORE WALLS
Turn off hot & cold water supplies.
Remove faucet handles, escutcheons, filler spouts and any
other fixtures & fittings (e.g. towel bars, soap dishes, etc.).
C) IF YOU PLAN TO INSTALL A SHOWER DOOR
Follow manufacturer's instructions and prepare stud wall
accordingly.
Safety Glasses
Masking Tape
EACH ALCOVE STUD MUST
BE PLUMB AND SQUARE.
7 55 5 78 -10 0 Rev. 4 0 2 /2 0
Publicidad
Manuales relacionados para LIXIL American Standard OVATION 2968BWT60
Resumen de contenidos para LIXIL American Standard OVATION 2968BWT60
- Página 1 INSTALLATION INSTRUCTIONS OVATION BATH AND SHOWER ® WALL SETS MODELS: 2968BWT60, 2968SWT60 Visit www.americanstandard.com for coordinating products. Thank you for selecting American Standard - the benchmark of fine quality for over 140 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) BEFORE YOU BEGIN..
- Página 2 DRY FITTING THE PANELS ON THE WALL A) Dry fit the panels starting with the rear panel first, keeping it centered, equidistant between the 2 rear corners of the wall. Use masking tape to hold panel in position. Mark a vertical line top to bottom at the corner edges of the panel on the rear wall to ensure panel is centered between the 2 corners as a reference.
- Página 3 INSTALLING BACK AND SIDE WALLS NOTE – INSTALL ONLY ONE WALL AT A TIME AND REMOVE FILM FROM WALLS PRIOR TO INSTALLATION. A) Wipe all back side of panels and walls with a damp cloth to remove any dust or debris and allow to fully dry.
- Página 4 This warranty gives you specific legal rights. You may have other legal rights that vary from state to state. For service under this warranty, you should contact the following: In Canada: In Mexico: In the United States: LIXIL Canada ULC American Standard B&K Mexico American Standard Brands 5900 Avebury Rd. S. de R.L. de C.V.
- Página 5 INSTRUCCIONES DE INSTALACIÓN JUEGOS DE PARED PARA DUCHAS Y TINAS OVATION ® MODELOS: 2968BWT60, 2968SWT60 Visite www.americanstandard.com para ver los productos que hacen juego. Gracias por elegir American Standard, el parámetro de excelente calidad por más de 140 años. Para asegurar que este producto se instale de manera adecuada, lea las instrucciones con atención antes de comenzar.
- Página 6 MONTAJE A SECO DE LOS PANELES EN LA PARED A) Monte a seco los paneles comenzando con el panel posterior primero, manteniéndolo centrado, equidistante entre las 2 esquinas de la pared. Use cinta protectora para mantener el panel en su lugar. Marque una línea vertical de arriba a abajo en los bordes de esquina del panel en la pared posterior para asegurarse de que el panel esté...
- Página 7 INSTALACIÓN DE PARED POSTERIOR Y LATERALES NOTA - INSTALAR SOLO UNA PARED A LA VEZ Y RETIRAR LA PELÍCULA DE LAS PAREDES ANTES DE LA INSTALACIÓN. A) Limpie el lado posterior de todos los paneles laterales con un paño húmedo para retirar polvo o residuos y deje secar por completo.
- Página 8 Esta garantía le otorga derechos legales específicos. Podrá tener otros derechos legales que varían según el estado. Para obtener un servicio cubierto por esta garantía, comuníquese con: En Canadá: En México: En Estados Unidos: LIXIL Canada ULC American Standard B&K Mexico American Standard Brands 1 Centennial Ave. 5900 Avebury Rd.
- Página 9 INSTRUCTIONS D’INSTALLATION ENSEMBLE DE MURS DE DOUCHES ET DE BAIGNOIRES OVATION MODÈLES : 2968BWT60, 2968SWT60 Pour trouver des produits associés, visitez www.americanstandard.com. Merci d’avoir choisi American Standard, la référence en matière de qualité depuis plus de 140 ans. Pour vous assurer que le produit a été...
- Página 10 MONTAGE À SEC DES PANNEAUX SUR LE MUR A) Fixez à sec les panneaux en commençant par le panneau arrière, en le maintenant centré et équidistant entre les deux coins arrière du mur. Utilisez du ruban masque pour maintenir le panneau en place. Marquez une ligne verticale de haut en bas sur les bords des coins du panneau sur la paroi arrière pour vous assurer que le panneau est centré...
- Página 11 INSTALLATION DE MURS ARRIÈRES ET LATÉRAUX REMARQUE – APPLIQUEZ L’ADHÉSIF SUR UN SEUL MUR À LA FOIS ET RETIREZ LE FILM DES MURS AVANT L’INSTALLATION. A) Essuyez l’arrière des panneaux et des murs avec un chiffon humide afin d’éliminer la poussière ou les débris et laissez sécher.
- Página 12 Pour obtenir un service couvert par cette garantie, contactez le service suivant : Aux États-Unis : Au Canada : Au Mexique : American Standard Brands LIXIL Canada, ULC American Standard B&K Mexico 1 Centennial Ave. 5900 Avebury Rd. S. de R.L. de C.V.
- Página 13 INSTALLATION INSTRUCTIONS OVATION ™ HIGH GLOSS ACRYLIC SURFACE MODELS: 2647.112 & 2647.212 USED WITH BATH WALLS: 3060BW1 Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
- Página 14 ROUGH-IN INFORMATION: OVATION TUB 60" (1524mm) 9-1/2" (241mm) 15" (381mm) 3-1/16" (78mm) 3-13/16" (97mm) 30" (762mm) 1-7/8" 33-3/4" (48mm) (857mm) C/L of pipe location from tub edge 3-1/2" (89mm) 3" 1" GENERAL SPECIFICATIONS FOR 2647 TUB (76mm) (25mm) INSTALLED SIZE 60 x 30 x 18 In.
- Página 15 A.) THIS BATH MUST BE SUPPORTED ALONG IT'S ENTIRE BOTTOM. We recommend the use of mortar as bedding material (sand is not recommended). Apply enough bedding to support the complete bottom of the bath. After the bedding has been poured, and before it sets, position the bath within the recess until the rim is leveled against the leveling stringers (see "Typical Recess Installation") shown below.
- Página 16 POST INSTALLATION CLEAN-UP Remove all construction debris from bath. Tile grout can be removed with a wooden popsicle stick or tongue depressor. Do not use wire brushes or any other metal implement on bath surface. Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent. Stubborn dirt or ®...
- Página 17 Rumson Pressure Balance Tub and Shower Set ™ Products Designed Around You Des produits conçus en fonction de vos besoins 7417502 Ensemble de bain et douche à éuilibrage STYLE INNOVATION PERFORMANCE STYLE INNOVATION de pression Rumson RENDEMENT 7417502 TOILETS OWNERS MANUAL •...
- Página 18 Installation Instructions Instructions d’installation Install Supports for Tub Spout, Valve Body and Shower Assemble and Solder 1-7/8" to 3-1/4" Installer des supports (montants) pour le bec de baignoire, All Connections on Roughing-In Dimensions 1-7/8 po à 3-1/4 po le corps de vanne et la douche Piping Assemblies Dimensions de Préparation (48 mm à...
- Página 19 Products Designed Around You Rumson Pressure Balance Tub and Shower Set ™ Productos diseñados pensando en usted 7417502 INNOVATION STYLE PERFORMANCE Rumson Juego de Bañera y Ducha con Presión Equilibrada I ™ ESTILO INNOVACIÓN 7417502 DESEMPEÑO TOILETS OWNERS MANUAL American Standard’s everyday and •...
- Página 20 Installation Instructions Instrucciones de Instalación Assemble and Solder Install Supports for Tub Spout, Valve Body and Shower All Connections on Instale los soportes para el pico de la tina, el cuerpo de la válvula y la ducha Roughing-In Dimensions 1-7/8" to 3-1/4" Piping Assemblies (48mm a 83mm) Dimensions de Desbastado...