Velleman KSR20 Manual Del Usuario página 2

After the assembly of your Tobbie II robot, program the micro:bit. There are 12
program examples available, where the 12
mobile device such as a tablet or smartphone.
First, check the assembly with the first example program 00.Assembly Checker.
Upload the example code (.hex file) to micro:bit. To do so, follow the steps below:
1. Download the example (zip file) from the download section on the KSR20 product
page:
https://www.velleman.eu/downloads/files/downloads/ksr20-tobbie-ii-microbit.zip
2. Connect the micro:bit to your PC using a micro USB cable.
3. Open the zip folder and navigate to the 00.Assembly Checker.hex file.
4. Copy the file to the removable micro:bit drive and rename it "MICROBIT".
5. After uploading (the LEDs stop blinking) disconnect the micro:bit and place it back
into Tobbie's holder, the LED matrix facing to you.
For more information, see the micro:bit set-up page:
or an instruction video on how to upload the code:
V. 02 – 23/05/2022
KSR20 - ADDENDUM
USER MANUAL
HOW TO USE TOBBIE II AFTER ASSEMBLY
https://microbit.org/get-started/first-steps/set-up/
https://youtu.be/-FZ8yTnoozY
th example is an app to control Tobbie II via a
2 ©Velleman Group nv