Descargar Imprimir esta página

EAS ELECTRIC EMZ145W Manual De Instrucciones página 23

Ocultar thumbs Ver también para EMZ145W:

Publicidad

Idiomas disponibles

Idiomas disponibles

Section 4. Maintenance
Before any maintenance or cleaning work is carried out, DISCONNECT the
appliance from the ELECTRICITY supply.
4.1. Internal Cleaning
Clean the interior and accessories with warm water and bicarbonate of
soda (5ml to 0.5 litre of water). Rinse and dry thoroughly. Do not use
detergents, abrasive powders, highly perfumed cleaning products, wax
polishes or cleaning products containing bleach or alcohol.
4.2. External Cleaning
Wash the outer cabinet with warm soapy water. Do NOT use abrasive
products. There may be sharp edges on the underside of the product, so
care should be taken when cleaning. Once or twice a year dust the rear of
the appliance and the compressor at the back of the appliance, with a
brush or vacuum cleaner, as an accumulation of dust will affect the
performance of the appliance and cause increased energy consumption.
4.3. Defrosting
The fridge compartment will not automatically defrost itself, you will need
to defrost it periodically. When ice build up exceeds 3-5mm, empty the
contents and switch off the appliance, leave the door open and allow the
ice to melt. Place the frozen foods items in a cool-bag or wrap them in thick
newspaper. Do not use sharp objects to scrape the ice away. Clean and dry
the interior, close the door and turn on the power to the appliance. When
the power has been restored the appliance will start to operate but it may
take some time to achieve the pre-set operating temperature.
4.4. When the appliance is not in use
When the appliance is not in use for long periods, remove the contents,
disconnect from the electricity supply and clean the appliance, leaving
the door ajar until you wish to use the appliance again.
4.5. Changing the Interior Light (Except Freezer compartment)
Switch off the power supply to the appliance.
Remove the plastic light cover.
Remove the lamp from the light unit.
Replace the lamp with a suitable replacement.
Refit the cover and switch the appliance back on.
10
V.2

Publicidad

loading