Directions For Use; Troubleshooting - EMGA Spinner Manual De Uso Y Mantenimiento

Standards applied
The SPINNER electric cake turntable is only intended for operation in CLASS B environments.
Class B equipment is only intended for use in domestic environments and similar.
Electric compatibility issues may arise in other environments due to conducted and radiated
emissions.
The appliance has been placed on the market solely for professional use, for use in bakeries
Plug the power cord into the connector on the back of the device.
1
Plug the other end of the cable into the power socket, making sure first that the rating is
2
correct.
3 Switch on the device by setting the switch on the back of the device to (1).
Turn the knob on the front of the device to control the plate's direction and speed of
4
rotation.
FAULT
The device fails to switch
A on with the switch set to
(1)
The unit's central LED is
lit, but the motor fails to
B
start when the knob is
turned
The plate fails to move or
C rotates only slowly when
the knob is turned
Electromagnetic Compatibility Directive EMC: 2014/30/EU
WEEE Directive: 2012/19/EU
ATTENTION:
5.0 APPLICATIONS
producing cakes and pastries.

6.0 DIRECTIONS FOR USE

7.0 TROUBLESHOOTING

POSSIBLE CAUSE
Power cord not plugged in
properly
Light on switch is lit and
central LED is unlit
The motor may be
disconnected or broken
It may be jammed
ENGLISH
RoHS Directive: 2011/65/EU
EN 60335-1:2012
Check that both the connector on
the back of the device and the
plug in the power socket are
plugged in correctly
Contact Martellato customer
Contact Martellato customer
Check for foreign matter between
the housing and rotating plate
and, where necessary, remove it.
REMEDY
support
support
13