Corghi DV 120 Manual De Uso página 19

STOPPING PROCEDURES AND DEVICES
To interrupt any operation simply release the control lever ("dead-man" control princi-
ple) (B fig.1).
TROUBLESHOOTING
If leaks develop in the pneumatic system to an extent which impairs operation of the DV
120, proceed as follows:
a) remove the guard (C fig.1);
b) tighten all the connections firmly or replace any damaged lines with the correspon-
ding spare parts;
c) replace the guard.
In case of failures not covered by these instructions, contact the after-sales service, stat-
ing the part code and the position of the individual piece in the drawings in the "Spare
Parts" manual supplied.
WARNING
The "Spare parts" handbook does not authorise the user to carry out work on the
machine with the exception of those operations explicitly described in the operator's
manual, but enables the user to provide the technical assistance service with precise
information, in order to reduce delay.
GB
DV 120 operator's manual 19