Tiny Geeks Tunes Manual página 6

FIRST USE
1. POWER UP
The TinyGeeks Tunes can be powered up via AC power or batteries.
AC POWER
Plug the AC cord into a standard AC
outlet (100-240V - 50/60 Hz)
2. TURN ON THE BOOMBOX
While on Standby mode, press the
Power button to turn on the boombox.
Hold the power button for 3
seconds to turn the RGB lights
on and off.
The TinyGeeks Tunes has a battery recharging system that recharges the
batteries when plugged in using the AC cord. If you plan to use the
TinyGeeks Tunes mainly while connected to an AC source for an extended
period, we recommend removing the rechargeable batteries to preserve
them.
RECHARGEABLE BATTERIES
1. Open the battery compartment cover.
2. Take out the included batteries.
3. Remove the protective film from the
batteries.
4. Insert the four batteries as shown above.
5. Close the battery compartment cover.
4