Publicidad
Idiomas disponibles
Idiomas disponibles
Place the unit in a way that ensures good air circulation. Maintain a minimum
clearance of 10 cm from any wall of the unit. Keep the unit away from any hot
surfaces. Always operate the unit on a level, stable, clean, fireproof and dry surface
and out of the reach of children and persons of impaired mental, sensory and
intellectual functions. Place the unit in such a way that the mains plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
•
The device should operate at a temperature of 5°C to 38°C.
•
The electrical installation that powers the device must be grounded.
•
Do not use the dehumidifier near walls, curtains or other objects that may block
the inlet and outlet. The air inlet and outlet should be free from obstruction.
•
If the machine is tilted by more than 45°, leave it upright for at least 24 hours
before putting it into operation.
Never install the device in places where it could be exposed to:
•
o
o
o
o
o
o
o
3.3.
IMPORTANT :
•
To prevent damage, the compressor delays startup for three minutes each
time the unit is started.
When the unit is running, the compressor produces heat, which is normal.
•
Switching on the unit
Press the ON/OFF button to start the appliance. To turn off the device, press the
ON/OFF button again. After starting the device, the LED screen will show the
temperature and humidity of the environment.
Automatic defrosting
The surface of the evaporator will be covered with frost at low temperatures, which will
affect the efficiency of dehumidification. The device has an automatic defrosting
function. During defrosting, the compressor stops working and the "FROST" lamp is lit.
Heat sources, such as radiators, heaters, stoves or other devices that
produce heat.
Direct sunlight.
Mechanical vibration or shock.
Excessive dust.
Lack of ventilation.
Uneven surface.
Flammable gases.
Working with the device
Publicidad
