3. Features and specifications
This MPPT charger is designed for batteries to be charged with energy from solar panels
and car chargers (cigarette lighter), dismissing the charging station.
Check the input parameters and connect the cables correctly.
Anderson
Input:
DC 5521
Output:
Anderson
Peak power
Accessories
4. How to charge the battery
4.1 Charging with solar panel
1. Connect the GZE solar panel to the MPPT charger with the ANDERSON-MC4
cable (included).
NOTE: For a faster charging, you can use up to a maximum of three GZE200W
panels connected in series. See the connection method in the panel's manual.
NOTE: The MPPT solar charger supports two charging input methods: Anderson input
(standard for GZE solar panels) and DC5521 input (powered from car cigarette lighters).
In case of a simultaneous input, the system will give priority to Anderson input from solar
panel.
12-60V/10A Max (Max support 600W input)
12-60V/ 7A Max (Max support 420W input)
58.8V/10A Max
600W
Solar panel connection cable: Anderson-MC4
Battery connection cable: Anderson-XT60
12