Publicidad
Idiomas disponibles
Idiomas disponibles
2. Connect the MPPT charger to the battery with the ANDERSON-XT60 charging
cable (included).
3. The battery power level indicator corresponds to the LED that flashes during
charging (25%-50%-75%-100%). When charging is complete, all 4 indicators will
be on.
4. While the battery is charging, the battery power level LED indicator will always be
on. When you finish recharging the battery or if you are going to store it, press and
hold the ON/OFF button for more than five seconds to turn it off completely. You
can turn on the battery by pressing ON/OFF at any time to know the charge level
of the battery
13
Publicidad
