Publicidad
Idiomas disponibles
Idiomas disponibles
11
4. Make holes on the wall, the distance
between the two holes on the hanger is 2CM.
and the distance between the two hangers
basic on the shower panel.
5. Put four screw sets into the hanger's holes
and in the wall, then use four screws to fix the
hangers on the wall.
6. Put the shower panel on the wall. Put one
filter in each side of water-in hose and
connect the hot/cold water. Both hot and cold
supply feeds must have accessible isolated
valves fitted in-line for servicing purposes (not
7.Finish as the picture.
supplied).
Publicidad
