NOTE: Sanitation adapter is not included. Can be purchased as an accessory for the cooler.
NOTE: Remember to dismount the tap and remove the cleaning balls.
21. MAINTENANCE
Flush the beverage tubing of the cooler after
each use with pressurised water (see Sanita-
tion by Water). To make flushing easier, use a
sanitation adapter according to your type of
keg coupler (sanitation adapter is not includ-
ed). The cooler must be sanitised once every
14 days by a person with chemical
22. INSPECTION BEFORE EVERY USE
1. Visual check.
2. Lead-in cable check.
3. Condenser cleanliness check (in case of excess pollution of the condenser, clean more fre-
quently than 1x a month).
WARNING: Do not use the device if defects or malfunctions are found.
23. PERIODIC CHECKS
1x a week: check that the lead-in cable is
undamaged and that the plug is firmly in the
socket.
1x a week: check that the device is not ex-
posed to radiant heat.
1x a week: check that air circulation is not
obstructed.
24. ENVIRONMENTAL PROTECTION
Waste Sorting
This product must not be disposed of in communal waste. Electrical waste in the Czech
Republic is disposed of within the Rema System (www.remasystem.cz).
In countries other than the Czech Republic, waste sorting is subject to local regulations.
Sorting waste allows recycling and reusing used products and packaging materials. Reuse
of recycled material helps protect the environment from pollution and reduces resource
consumption. Local regulations may regulate the method of disposing of household ap-
pliances at local collection points or at the point of sale.
(see Fig. 21.)
engineering qualifications. The condenser
must be checked for cleanliness every month.
Any dirt found must be cleaned with com-
pressed air or wiped off. Otherwise, there is a
risk of reduced cooling output or damaging of
the cooler.
1x a month: check the cooling unit's con-
denser and clean it regularly.
1x a year: have an engineering inspector
check the electrical safety of the device.
EN
23